If the camera is plugged into the external PoE, then it’s the password that you’ve created once the camera was activated. If you’re accessing it using the Virtual Host, the camera’s username/password should be the same as the NVR. Now, we can adjust the settings on the PTZ camera. This is where you’d start if you had an external PoE switch. Next, go to Configuration > System > Camera Management and click on the IP address that is next to the PTZ (for example camera 1).Ī new tab will open after you click on the PTZ URL. This feature allows you to directly access the PTZ camera even if it’s connected to the back of the PoE NVR. Once the Virtual Host is enabled, save the settings. Navigate to Configuration > Network > Advanced > Other and click Enable Virtual Host. Enter the username and password.Īfter signing in. Then you will get a log-in screen for the NVR. Type in the NVR’s IP address into the URL bar on Internet Explorer. You can find the NVR’s IP address using the SADP Tool. Virtual Host can be accessed through the NVR’s web interface on a computer/laptop. If the camera is connected directly to the NVR, then the Virtual Host will be required (skip these steps if the camera is plugged into an external switch). This feature allows you to access the individual settings of a camera connected straight into the back of the NVR. If your camera is connected directly to the NVR (the so-called NVRs with built-in PoE), then the Virtual Host is required. (If you don’t know how to find the IP address of the camera, consult this guide). Enter your username and password for the cameras. If your camera is connected to an external switch, type the IP address of your PTZ cameras on the Internet Explorer browser and the logging screen will pop up. How to enable the Auto Tracking feature on Hikvision PTZ cameras?įirst, we need to access and set up the auto tracking feature. These instructions are valid as long as the interface looks the same or similar. It’s applicable to all PTZ cameras should under the Hikvision brand name and other third-party brands. In this guide, we will show you how to enable the Auto Tracking feature on Hikvision cameras and their OEMs. When the subject moves within these zones, the camera will stay fixed on that location or even track the subjects based on its programming. Moreover, the users can create unique preset zones within a scene. Simply set up the auto tracking feature, define the area of interest and let the camera do its magic. It’s ideal for large areas and this PTZ makes it possible to monitor areas without the need for human operators. Auto tracking PTZ cameras follow the subject around the person based on motion detects and paths under surveillance.
0 Comments
Leave a Reply. |